Resetting your Win95 Modem

In Order to Reset your Win95 modem, you'll need to talk to it directly, Hyperterminal allows you to do just that.

  1. Start HyperTerminal.
  2. Enter a name for the connection (for example, Test) in the Name box.
  3. Click an icon for the connection in the Icon box, and then click OK.
  4. In the Connect Using box, click Direct To Com X (where X is the port your modem is connected to) and then click OK.
  5. Verify the settings on the Port Settings tab and then click OK. You can now type AT commands.
  6. Quit HyperTerminal. When you are prompted "Save session <name>?" click Yes if you want to save the session so that you can use AT commands at another time.
Copyright 1997-2018 NetRunner Inc. All Rights Reserved.